Customization: | Available |
---|---|
After-sales Service: | One-Stop Service |
Warranty: | 1 Year |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
MNF60F Flow Switch is an intelligent thermal difusion principle-based flow monitoring sensor. It adopts ARM processing core and combines with high quality sensors and dedicated circuit. With temperature-compensation and calibration, it can ensure measurement accuracy in the case of water temperature change. It is available for real-time monitoring of pipe water flow. It can be used for cooling or lubrication system flow monitoring to realize pre-warning and protection for critical equipment when there is flow fault. It uses fully enclosed design, stainless steel construction to adapt to a variety of application environment. It is with overvoltage, over-current and reverse polarity protection function. MNF60F supports quick action point set, also it has display inversion function that enables installation in any direction, and no need for frequent adjustment and maintenance. It can be applied for operation protection of large equipment in felds such as power generation, metallurgy, steel, paper, boilers etc.
Features
1. All stainless steel housing, IP67 protection
2.Temperature compensation
3.There are many output modes to choose form
4. No moving parts, maintenance-free
5. Switch output, control point setting continuously on panel
6. Compact size, support inverted display
7. Mounting joint can be equipped with
8. Different interfaces for a variety of pipe diameters requirement
Measure Range | 1cm/s ~ 150cm/s (water) |
Optimal Range | 3cm/s ~ 100cm/s (water) |
Power Supply | (24±4.8)V DC |
Working Current | ≤ 60mA |
Switch Accuracy | ±10cm/s |
Hysteresis | ±2cm/s ~ ±8cm/s |
Output Signal | 1 relay/2 PNP,2PNP+4 ~ 20mA DC |
Output Function | NO, NC(optional) |
Relay Characters | Switch voltage: ≤ 250V AC / 30V DC Switch current: ≤3A |
Transistors Characters | Switch voltage drop: ≤ 1.5V Switch current: ≤ 400mA |
Display | OLED indicator, resolution 128×32 |
Electrical Protection | Reverse, short-circuit,over-voltage |
Housing | Stainless steel |
Button | PP |
Probe | Stainless steel |
Installation | Joint mounting + adaptor |
Endurance Pressure | 10MPa |
Electrical Connection | M12×1 5-pin plug |
Gross weight | 265g |
Water Temp. | -20ºC~ 80ºC |
Storage Temp. | -30ºC~ 85ºC |
Working Temp. | -20ºC~ 70ºC |
Protection | IP67 |
Temperature Compensation | 5ºC~ 50ºC (water) |
Q:Do you have MOQ?
A:We don't have MOQ